◆ It consists of three groups of idler buffer components, two groups of buffer strip buffer components, two groups of transition idler buffer components and suspension channel steel. Each component can be disassembled and installed separately, and assembly is simple and convenient.
◆ The cushion rollers are installed on the cushion assembly of the idler, which is the same as the traditional cushion roller group. The cushion strip assembly is arranged at intervals to change the sliding friction between the cushion bed and the belt into rolling friction, reduce the running load of the belt conveyor, and prolong the service life of the belt and the cushion bed.
◆ The bed support of buffer strip buffer assembly is made of double angle steel, which effectively improves the strength of the component and can withstand the strong impact of the upper tape material on the next tape.
◆ Buffer strip can be replaced by single strip, easy to install and disassemble.
◆ The buffer assembly of transition idler is similar to the transition idler group on belt conveyor. When the belt runs at low altitude, the change caused by the slot angle of the belt itself can be effectively solved by the difference of the slot angle, so that all parts of the system can work effectively.
◆ Scope of application: Usually used in the lower blanking point of bucket wheel machine
◆ Suitable for bandwidth:1200-2000mm
◆ Order model:KHD01.**.1.0（Bandwidth code**：12/14/16/18/20）